Home > News > Content


Add: 2/FL., Building 1, Baowei Science Park, 3003# Xinluo Street, High-tech Development District, Jinan, 250101, China
Contact: Estella Li
Tel: +86-531-66595529
Mob: +86-18678899109
Fax: +86-531-66591475
E-mail: info@baekeland.cn

The Characteristics Of Plastic Products

- Aug 04, 2017 -

Plastic products is the use of plastic as the main raw material processing of daily necessities, industrial supplies collectively.

The main performance characteristics of plastic

plastic product.jpg

1. Light weight

Plastic is a lighter material with a relative density distribution between 0.90-2.2. Obviously, can the plastic float on the water? In particular, foam plastic, due to microporous, lighter texture, the relative density of only 0.01. This feature allows the plastic to be used in products that require weight reduction.

2. Excellent chemical stability

The vast majority of plastic on the acid, alkali and other chemical substances have a good anti-corrosion ability. In particular, commonly known as the plastic king of polytetrafluoroethylene (F4), its chemical stability even better than gold, on the "aqua regia" cook for a dozen hours will not deteriorate. Because F4 has excellent chemical stability, is the ideal corrosion-resistant materials. Such as F4 can be used as a corrosive and viscous liquid pipeline material.

3. Excellent electrical insulation performance

Ordinary plastic is a bad conductor of electricity, the surface resistance, volume resistance is large, with the number that up to 109 a 1018 ohm. The breakdown voltage is large and the dielectric loss tangent is small. Therefore, the plastic industry in the electronics industry and the machinery industry has a wide range of applications. Such as plastic insulated control cables.

4. The bad conductor has a muffling and damping effect

In general, the thermal conductivity of plastic is relatively low, equivalent to steel 1 / 75-1 / 225, foam microporous

Contains gas, its insulation, noise, shock better. Such as polyvinyl chloride (PVC) thermal conductivity of steel is only 1/357, aluminum 1/1250. In the insulation capacity, single glass-plastic window than the single glass aluminum window 40% higher, double glass 50% high. After the combination of plastic form and insulating glass, in the residential, office, ward, hotel use, save the winter heating, summer air conditioning expenditure, the benefits are very obvious.

5. Wide mechanical strength distribution and higher specific strength

Some plastic hard like stone, steel, and some soft as paper, leather; from the plastic hardness, tensile strength, elongation and impact strength and other mechanical properties, the distribution of a wide range, there is a great use of choice. Due to the small proportion of plastic, high strength, which has a high specific strength. Compared with other materials, plastic also has obvious shortcomings, such as easy to burn, the stiffness is not as high as metal, aging resistance is poor, not heat and so on.

Related News

Related Products

  • Food Packaging Plastic Bags for Food Factory Direct Sales
  • Cheaper Garbage Plastic Bags
  • Zip Top Plastic Bags
  • Waterproof Zip Lock Bags for Clothes
  • Household Large Plastic Garbage Bags
  • White T-shirt Plastic Bag with the Omaba Printing